Produse pentru preparate alimentare 12v 3a (8)

24VDC / 5VDC 10A

The charging generator CG 202 optimally supplies every charging component of KERSTEN Electrostatik. It delivers a regulated (digital PID control) output voltage of maximum -25kV. The power supply is independant of the world’s varying supply standards by using an input voltage of 24V DC ±10 %. Four charging components can be connected to special high-voltage plug-in connections. Operating parameters are displayed and storable via graphic display and foil-keypad, or can be taken from an industry-standard current interface. Both can be used to operate the system. In addition, an optional discharging generator can be connected to and controlled via the generator. Cerificate:TÜV / GS / NRTL Production:Germany IP Class:IP 65 Material:Plastic / Metall Connections:4

Gleichspannungswandler-344-24-SD || Eingangsspannungsbereich von 22V bis 160V | Ausgangsspannung: 24V | Ausgangsleistung: 50W | Für Umgebungstemperaturen bis +85°C | Kein Leistungsderating

Für eine gesunde und ausgewogene Ernährung – zum Zubereiten von Fisch, Fleisch, Gemüse, … >>separate digitale Steuerung je Seite >>g roßes, gut leserliches LCD-Display >> einfach gesund Kochen – 50% mehr gesunde Inhaltsstoffe bleiben erhalten >> 60 Minuten Timer >> leichte Reinigung – alle Behälter sind spülmaschinengeeignet >> 12 Liter Fassungsvermögen (4 x 3 Liter) >> auch zum Eierkochen geeignet >> Trockengehschutz – Sicherheitsabschaltung mit akustischem Warnsignal >> großer Wasserbehälter – kann auch während des Betriebs nachgefüllt werden >>230V~1500W

The special kind of films and coating patterns used in our oil-filled E63-capacitors give them a high specific ratio of capacitance to volume and makes them extremely overvoltage proof. Very good self-healing characteristics and the integrated overpressure protection (" BAM ") ensure safe operation and controlled disconnection in the event of overload or failure at the end of operating life. Hence the E63s are interesting particularly for applications with high AC ripple currents, e.g. as smoothing or supporting capacitors in buffer storage circuits, in sensitive environment with high safety requirements. Note that the presence of an overpressure mechanism adds substantially to the self-inductance of the capacitor, and limits the surge current rating. If self-inductance and surge current are important issues, then our E50 or E53 ranges may be considered as a more adequate option.

2x(0 – 30VDC / 0 – 5A)

AC / DC 0 – 25V / 10A; 6V / 5A

The PK16™ capacitor can be universally used for the assembly of low inductance DC buffer circuits and DC filters; with its high energy density it can replace banks of series-connected electrolytic capacitors as well as large film capacitors in rectangular cases. The capacitance in a DC buffer circuit must be sufficiently sized to both handle and smoothen the occurring ripple currents. The traditional use of series-/parallel-connected electrolytic capacitors offered large capacitance at seemingly low cost, however the low cost per microfarad is countered by the very low current strengh, the high sensitivity to voltage and current surges, as well as a substantial risk of failures in the field, resulting in high maintenance cost. Our advanced know-how in special capacitor film coating and many years of practical experience in designing and manufacturing capacitors have allowed us to develop our PK16™ range with high capacitance density.